Customization: | Available |
---|---|
After-sales Service: | Comprehensive After-Sale Service |
Warranty: | 3 Years |
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
ABS Fitting Types
1. Couplings
ABS couplings come in all different shapes and size to fit any needs. A coupling connects two different piping lengths, usually of the same diameter size, together to form one continuous long pipe. We also carry reducer/increaser fittings for connecting different sized pipes together.
2. Caps
Cap fittings are generally used at the end of a section of piping that is not going to be used. Caps are easy to install with a quick slip on fitting. ABS pipe fittings provide a tight cap that will ensure the end of the pipe is closed off and secure to prevent any leakage.
3. Elbows
Any elbow fitting provides the perfect solution when the direction of the pipe needs to be changed. Whether the pipe needs to be moved slightly or dramatically with elbows ranging from 22 ½ degrees to 90 degrees, we has them all.
4. Turn Tees and Wye Tees
Turn tees are the right answer when you are looking to split a connection with one side of the ABS pipe tee going straight and the second side of the tee turning to the desired destination. Wye tees also provide a similar option but have the choice of adding more than just two different splits in the connection.
5. Cleanouts
ABS cleanout fittings are made so that the user can have easy access to the drain to clean the drain out. The screw in cap makes a quick and easy one-step process to access the drain in case of a blockage or overflow.
6. P-Traps
This ABS pipe fitting can be used underneath a plumbing fixture or drain to prevent sewer gas from getting out, and it also allows for easy disassembling without having to cut apart the complete plumbing system.
Service temperature -40°F to 180°F | |||
Do not test or use with compressed air or other gases | |||
CSA B181.1 | |||
ASTM D3965 | |||
ASTM D2661 and D3311 | |||
Size range 1 1/2" to 4" | |||
PICTURE | SIZE | PART | CT |
1½ | 2876C | 10 | |
2 | 2877C | 100 | |
3 | 2878C | 54 | |
4 | 2879C | 20 | |
4 | 2229 | 35 | |
4×3 | 2228 | 35 | |
1-1/2 x 1-1/4 | 3389 | 100 | |
1½ | 3389 | 100 | |
1½ | 2922 | 10 | |
2 | 2923 | 100 |
1. Environmentally sound.
2. Provide long service life.
3. Easy to install and handle.
4. Corrosion resistant.
5. Cost effective.
6. Widely accepted by codes.
Is ABS Easy to Install?
Whether you are a contractor or do-it-yourselfer, ABS is easy to install and can create a less strenuous project. It is lightweight so it can be easily unloaded and placed into position easily by one person. One advantage of the ABS piping is that it is easy to connect and construct your project. Priming glue is not necessary like with PVC applications. In order to join the ABS fittings and pipes, no special tools are required, and all that is needed is solvent cement.
ABS pipe fitting is used for:
1. Drain-waste-vent (DWV).
2. Sewers.
3. Water mains.
4. Water service lines.
5. Irrigation.
6. Conduit.
ABS Pipe Fitting Applications:
Water Supply Pipe
Due to its non-toxic properties, ABS pipe fittings can also be used in applications where high purity water, food products, and soft drinks pass through them.
Sewer
Due to the durability of an ABS fitting, it works in sewer systems. The ABS material is extremely smooth on the inside, which allows for easy passing of solids and other liquids.
Drainage
ABS drain fittings can be used for water drainage, such as from a washing machine or a dishwasher. Due to its wide range of resistance to extreme temperature, it is not damaged by the high temperature water that flows through the piping from some appliances.
Venting System or Plumbing Vents
These are pipes that lead away from the sewage system to the outdoors, and in many cases to the roof. It helps release sewer gases outside instead of into the house. Venting ABS pipe fittings allow for the equalizing of pressure on both sides of the trap, allowing the trap to hold water. This is necessary for the effectiveness of your sewer and drainage systems.
Various industrial installations
It can be used under ground or above ground in buildings. It can also be used outdoors if the pipe contains stabilizers and UV inhibitors to shield against ultraviolet radiation and it is painted with a water-based latex paint.
Weifang Hota New Material Technology Co., Ltd. (abbreviated as: Hota New Material) is a high-tech enterprise focusing on the research, development, production and sales of new materials and protective products and other series of products. The headquarters and R&D base are established in the scenic high-tech zone of Weifang City. The company has strong technology and R&D capabilities. It is a participant and practitioner of China's "One Belt, One Road" project, and a leading innovation brand in East China. Its textile factories, plastic factories, and new material factories have all passed the "ISO9001: 2000 international quality "Management System" certification and "ISO14001: 200114 International Environmental Management System" certification.
Q1: Are you a trading company or a manufacturer ?
A: We are the integration of industry and trade company located in Weifang. Specializing in the production of various chemical products, such as CPVC, PVC, CPE, ABS, ASA, HCPE, HDPE, chlorinated rubber and other chemical materials and products.Welcome to visit our factory any time.
Q2: Why to choose us ?
A1: We have rich experience and production equipment.
A2: We can meet the different requirements of customers for products.
A3: We can guarantee that the goods shipped to you in time after your payment.
Q3: Can I get samples for quality testing ?
A: Sure, we'll be glad to provide you with samples for evaluation.
Q4: How to store this product ?
A: Keep in a light-proof ,well-closed,dry and cool place.
Q5: Can I get any discount ?
A: The price is negotiable, we can offer you discount according to your order quantity.We also have promotions several times a year.
Q6: Do you accept small orders ?
A: Yes. We can accept small orders and are willing to grow up with you. And we are looking forward to co-work with you for a long term relationship.
Q7: Can you offer customized service?
A: OEM/ODM service support, we accept customization no matter on products or packing logo.
Q8: What certificate do you have ?
A: We have CE , ISO certificate.
Q9: The mode of transportation and delivery time ?
A: The time of delivery is usually around 7-15 days.
Q10: Does your company have after service ?
A: Our company has always put product quality in the first place, offer a comprehensive after-sale service.